logo

商品の詳細

Created with Pixso. Created with Pixso. 製品 Created with Pixso.
IPの試験装置
Created with Pixso.

Vertical Drip Water Test Equipment with 7 Inch Color Touch Screen 200mm Drip Height and Φ0.4mm Needle Hole for IPX1 to IPX2 Testing

Vertical Drip Water Test Equipment with 7 Inch Color Touch Screen 200mm Drip Height and Φ0.4mm Needle Hole for IPX1 to IPX2 Testing

ブランド名: HongCe
モデル番号: HH0801
MOQ: 1セット
価格: Negotiatable
支払条件: T/T
供給能力: 10セット/month
詳細情報
起源の場所:
中国
証明:
Calibration Certificate (Cost Additional)
ドリップエリア:
1000mm*600mm (カスタマイズ可能)
テスト範囲:
IPX1からIPX2
針穴:
Φ0.4mm
ドリップ高さ:
200mm
制御と運用:
PLCインテリジェント制御,7インチ色タッチスクリーン操作
回転盤の直径:
Ø800mm (カスタマイズ可能)
回転速度:
1r/min
テスト時間:
0-999.9分
パッケージの詳細:
合板
ハイライト:

7 Inch Color Touch Screen Vertical Drip Water Test Equipment

,

200mm Drip Height IP Testing Machine

,

Φ0.4mm Needle Hole Waterproof Testing Device

製品の説明
IPX1 IPX2 Vertical Drip Water Test Equipment | IEC 60529 Ingress Protection Testing Machine
The Vertical Drip Water Test Equipment from HONG CE, a trusted original manufacturer in IP testing solutions, is designed for precise evaluation of water ingress protection levels (IPX1 and IPX2). This device ensures that your products meet global waterproof testing standards, providing reliable results for industries demanding quality and durability.
Key Features
  • Complies with IEC 60529 standards for IPX1 and IPX2 waterproof testing
  • Adjustable drip rate and height to simulate real environmental rainfall scenarios
  • High-precision flowmeter and water distribution system for consistent droplet formation
  • Motorized sample table with adjustable angle (0°–15°) for IPX2 testing
  • Stainless steel structure (SUS304) ensures long-term durability and corrosion resistance
International Reference Standards
  • IEC 60529: International Standard for Degrees of Protection by Enclosures (IP Code)
  • IPX1 Test Requirements: Vertical dripping water, dripping rate 1-1.5 mm/min, test duration 10 minutes
  • IPX2 Test Requirements: Water dripping at a 15° angle, dripping rate 3-3.5 mm/min, test duration 10 minutes (2.5 minutes per tilt position, totaling 4 positions)
Applications
Test for second characteristic numeral 1 & 2 with drip box. For assessing the protection against vertically falling water drops.
Test Objects
  • Electrical appliances (switches, sockets, plugs)
  • Automotive electronic modules
  • Outdoor luminaires
Detectable Parameters
  • Drip water penetration
  • Surface wetting resistance
  • Seal integrity under vertical water impact
  • Waterproof performance degradation under tilt angle
Technical Parameters
Item Parameter
Water supply Water flow rate>10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operation PLC intelligent control, 7 inch color touch screen operation
Testing time 0-999.9min
Water tank size Outline dimension:WDH=750*1400*1750mm, fully enclosed water tank, SUS304 material
Drip test area 1000*1000mm, customizable
Drip height 200mm, adjustable
Dripping rate (Water flow) 1 mm/min or 3 mm/min switchable, adopt digital controlled rainfall technology
Needle hole Φ0.4mm
Distance between holes 20mm
Supporting sample 15°bevel
Water tank lifting drive Motor drive, screw guide rail to ensure the stable lifting and self-locking
Installation method Wall mounted
Turntable Rotating speed1r/min. Can be paused 150s at four aspects, Load bearing ≤150㎏electrical equipment, Diameter:800mm, Adjustable height of the adjustable telescopic tube: 300mm,1200mm-1500mm
Site requirements Dedicated IP waterproof test room,The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation.
Area covered WDH =1500mm*1500mm*3300mm, the size can be set according to customer's requirement
Product Images
Vertical Drip Water Test Equipment with 7 Inch Color Touch Screen 200mm Drip Height and Φ0.4mm Needle Hole for IPX1 to IPX2 Testing 0 Vertical Drip Water Test Equipment with 7 Inch Color Touch Screen 200mm Drip Height and Φ0.4mm Needle Hole for IPX1 to IPX2 Testing 1